Pulumi Complete Go Guide

Table of Contents

• Introduction
• Prerequisites
• Steps
• Alternative to Make Commands

Introduction

In this guide, we cover the complete steps to deploy a virtual machine on the grid with Pulumi via Go.

To provide a uniform deployment method, we use Docker for this guide. It is optional but will greatly facilitate the deployment as the steps will be similar for Linux, MacOS and Windows.

This guide is useful to get you started quickly with Pulumi on the TFGrid.

Once you've successfully deployed a VM, you can try all the different Go examples within the pulumi-threefold repository. The examples are available in the subdirectory /examples/go/.

Prerequisites

• A TFChain account
• TFT in your TFChain account
  • Buy TFT
  • Send TFT to TFChain
• Get Docker

Steps

• Deploy a Docker Ubuntu container in interactive mode:

  sudo docker run -it --net=host ubuntu:jammy /bin/bash
  

• In Docker Ubuntu, deploy a VM with Pulumi. Make sure to add your MNEMONIC and SSH_KEY below before running the script. For this deployment we use main as the NETWORK. Change this if needed.

  # Install the prerequisites
  apt update && apt install -y curl git wget make
  
  # Install Pulumi
  curl -fsSL https://get.pulumi.com | sh
  export PATH=$PATH=:/root/.pulumi/bin
  
  # Clone the ThreeFold Pulumi repo
  git clone https://github.com/threefoldtech/pulumi-threefold.git
  cd pulumi-threefold/examples/go/virtual_machine
  
  # Prepare the Pulumi Go environment
  # Install Go
  wget https://go.dev/dl/go1.23.0.linux-amd64.tar.gz
  rm -rf /usr/local/go && tar -C /usr/local -xzf go1.23.0.linux-amd64.tar.gz
  export PATH=$PATH:/usr/local/go/bin
  
  # Export the variables
  export NETWORK="main"
  export SSH_KEY="<ADD_YOUR_SSH_PUBLIC_KEY>"
  export MNEMONIC="<ADD_YOUR_MNEMONIC>"
  
  # Start Pulumi
  make run
  

• You can now SSH into the deployment from your local machine terminal

  ssh root@VM_IP
  

• To destroy the deployment, run the following line within the Docker Ubuntu terminal.

  make destroy
  

Alternative to Make Commands

You can use direct Pulumi commands instead of the Make commands above.

• You can replace make run with:

  pulumi login --local
  pulumi up
  

• You can replace make destroy with:

  pulumi down
  pulumi stack rm <stack_name>
  

That being said, the Make commands run additional features. Feel free to explore the possibilities and consult the files within the repo for more information.